|
|
 |
|
 |
|
|
$119.00
Nexys™3 Spartan-6 FPGA Board
|
IC: |
Xilinx Spartan®-6 FPGA (XC6LX16-CS324) |
Connector(s): |
USB2 port
High-speed 40-pin VHDC expansion connector
Four 12-pin Pmod™ connectors
VGA, 10/100 Ethernet |
Programming: |
Digilent USB2 port providing board power, programming, & data transfers |
- Xilinx Spartan6 XC6LX16-CS324
- 16Mbyte Micron Cellular RAM
- 16Mbyte Micron Parallel PCM
- 16Mbyte Micron Quad-mode SPI PCM
- 10/100 SMSC LAN8710 PHY
- Digilent Adept USB port for power, programming & data transfers
- USB-UART
- Type-A USB host for mouse, keyboard or memory stick
- 8-bit VGA
- 100MHz fixed-frequency oscillator
- 8 slide switches, 5 push buttons, 4-digit 7seg display, 8 LEDs
- Four double-wide Pmod™ connectors, one VHDC connector
- Rugged plastic case, USB cable included
|
 |
The Nexys™3 digital system development platform features Xilinx's newest Spartan-6 FPGA, 48Mbytes of external memory (including two non-volatile phase-change memories from Micron), and enough I/O devices and ports to host a wide variety of digital systems. The Nexys3 is an ideal platform for any engineer to gain experience with Xilinx's latest technologies, and it is perfectly suited to the classroom - new students can build logic circuits without worrying about complex external interfaces, and more advanced students can build complete digital systems, including controllers, CODECs, and embedded processors.
The on-board Adept™ high-speed USB2 port provides board power, FPGA programming, and user-data transfers at rates up to 38Mbytes/sec. A large collection of low-cost peripheral boards, including more than 30 Pmods™ and several new Vmods™, can add additional features to the Nexys3, including A/D and D/A converters, breadboards, motor drivers, displays, etc. The Nexys3 is fully compatible with all Xilinx tools, including the free WebPack™ as well as Chipscope™, EDK™ (embedded processor design kit) and other tools.
|
|
|
|
 |
|
 |
|
|
|
|
Related Products:
Digilent Adept
- Configure Xilinx logic devices, initialize scan chains, program FPGAs, CPLDs, and PROMs, and organize your configuration files
- Transfer data to and from the onboard FPGA on your system board. Read from and write to specified registers. Load a stream of data to a register or read a stream of data from a register.
- Organize and quickly connect to your communications modules.
- Program Xilinx XCFS Platform Flash devices, Xilinx CoolRunner2 CPLDs, and most Xilinx Spartan and Virtex series FPGAs
VmodTFT - Color LCD Touchscreen
- Connects to system boards with a VHDCI connector (Genesys, Atlys, ...)
- 4.3” color TFT LCD with resistive touchscreen
- 480×272 resolution, 24bpp color depth
- LED backlight with PWM control
- Includes on-board temperature sensor that can detect −40°C to 85°C
VmodCAM - Stereo Camera Module
- Connects to system boards with a VHDCI connector (Genesys, Atlys, ...)
- Contains two Aptina 2-megapixel CMOS sensors, spaced 63mm apart
- 1600x1200 maximum resolution at 15 FPS
- 10-bit raw color depth
VmodBB - VHDC Breadboard
- Connects to system boards with a VHDCI connector (Genesys, Atlys, ...)
- Two 32 pin breadboards with 16 pins each, connected directly to signals from the system board
- Two power and one ground bus around
- Prototype connections on every signal
- Ships with two 300 tie point breadboards separated by a 100 tie point bus strip
VmodWW - VHDC Wirewrap
- Connects to system boards with a VHDCI connector (Genesys, Atlys, ...)
- 33x17 hole wire wrap area
- 32 plated through-holes connected directly to signals from the system board
- Two power and one ground bus around
- Prototype connections on every signal
|
|
|
|
|
|
|
|
|
Support Documents:
| Doc # |
Date |
Categories |
Description |
|
| 500-182 |
5/31/11 |
|
Nexys 3 schematics |
Download |
| 502-182 |
4/03/13 |
|
Nexys 3 reference manual |
Download |
| DSD-0000305 |
3/22/13 |
|
Nexys3 Board support files for EDK BSB wizard. Supports EDK 13.2-14.4 for both AXI and PLB buses. |
Download |
| DSD-0000306 |
1/15/13 |
|
Master UCF File for Nexys3. |
Download |
| DSD-0000314 |
8/16/11 |
|
Nexys3 demo ISE project that demonstrates how to use the buttons, switches, LEDs, 7-segment display, and USB-UART bridge.
This project was made for Xilinx ISE 13.2. |
Download |
| DSD-0000315 |
8/16/11 |
|
Nexys3 demo EDK project that demonstrates how to use the buttons, switches, LEDs, 7-segment display, and USB-UART bridge. This is a PLB based design.
This project was made for Xilinx EDK 13.2. |
Download |
| DSD-0000322 |
11/23/11 |
![Board Verification]( "Board Verification")
|
This ZIP file contains both configuration files loaded into the BPI Parallel Flash and SPI Flash at the factory. |
Download |
| DSD-0000323 |
11/28/11 |
|
This demo project is for the VmodTFT and either the Nexys3 or the Atlys. It continuously samples the VmodTFT's touch panel for X, Y and pressure values and lights up the pixels touched. |
Download |
| DSD-0000381 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodACL. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000382 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodACL. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000383 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodCLP. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000384 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodCLP. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000385 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodCLS. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000386 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodCLS. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000387 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodENC. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000388 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodENC. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000389 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodGYRO. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000390 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodGYRO. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000391 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodHB5. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000392 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodHB5. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000393 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodJSTK. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000394 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodJSTK. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000395 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodKYPD. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000396 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodKYPD. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000397 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodOLED. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000398 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodOLED. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000399 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodPS2. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in VHDL. |
Download |
| DSD-0000400 |
9/07/12 |
|
This zip file contains a Xilinx ISE demo project for the PmodPS2. This project was made for Xilinx ISE 14.2, targets the Nexys3, and is written in Verilog. |
Download |
| DSD-0000416 |
3/22/13 |
|
Nexys3 demo EDK project that demonstrates how to use the buttons, switches, LEDs, 7-segment display, and USB-UART bridge. This is an AXI based design.
This project was made for Xilinx EDK 14.4. |
Download |
|
|
|
|
|
|
